The Ultimate Guide to Cold Storage Panels: Selection, Installation, and Maintenance Tips You Can't Miss!

1. What Materials Are Used for Cold Storage Panels? Which One is Right for You?

Common materials for cold storage panels include Polyurethane (PU), Expanded Polystyrene (EPS), and Extruded Polystyrene (XPS). Each has its pros and cons:

• Polyurethane (PU): Best insulation performance, high fire resistance, but more expensive.

• Expanded Polystyrene (EPS): Affordable, but average insulation and poor fire resistance.

• Extruded Polystyrene (XPS): High strength, excellent moisture resistance, and moderately priced.

How to Choose?

• For large cold rooms or high insulation requirements, PU panels are recommended.

• For small cold rooms or budget constraints, XPS or EPS panels are suitable.

2. How to Choose the Right Thickness for Cold Storage Panels?

The thickness of cold storage panels directly affects insulation efficiency. Common thicknesses include 50mm, 75mm, 100mm, 120mm, and 150mm.

• Low-Temperature Cold Rooms (below -18°C): Choose panels thicker than 100mm.

• Medium-Temperature Cold Rooms (0°C to -18°C): 75mm to 100mm is sufficient.

• High-Temperature Cold Rooms (above 0°C): 50mm to 75mm is adequate.

Tips: Thicker panels offer better insulation but come at a higher cost. Balance your choice based on actual needs.

3. Common Installation Issues and Solutions

• Issue 1: Cold Leakage at Joints
  Solution: Use specialized sealant during installation to ensure tight, seamless joints.

• Issue 2: Panel Deformation
  Solution: Choose high-quality panels and ensure even pressure distribution during installation to avoid localized stress.

• Issue 3: Poor Insulation Performance
  Solution: Verify panel thickness and material suitability, and avoid thermal bridging during installation.

4. Daily Maintenance and Care for Cold Storage Panels

• Regularly inspect panel joints and repair any damage promptly.

• Avoid collisions with sharp objects to prevent scratches or dents.

• Clean with a soft cloth and avoid using corrosive cleaning agents.

Conclusion:

Selecting and installing cold storage panels may seem simple, but it involves many critical details. Choosing the right material and thickness, along with proper installation, is essential to ensure efficient operation and long-term performance of your cold room. If you’re planning a cold room project, save this guide to avoid common mistakes!

Have you encountered any challenges when selecting or installing cold storage panels? Share your experiences in the comments, and let’s discuss solutions together!

We hope this article provides valuable insights into cold storage panels! If you found it helpful, don’t forget to like and share!