Precautions for stacking color steel sandwich panels

So what are the precautions when stacking? Let's take a look together:

The stacking location of color steel sandwich panels should be located near the installation point to avoid long-distance transportation. They can be placed around the building or on the site inside the building.

2. The stacking area of the board should be flat, so that the board is not easily impacted, contaminated, worn, and soaked in rainwater during engineering transportation and construction.

When stacking, load-bearing materials such as wooden pads should be placed, and the boards should be placed at a vertical inclination to facilitate rainwater drainage.

4. There should be a secondary processing site next to the area where color steel sandwich panels are stacked.

5. When the construction cannot be carried out for a long time and the construction is dry, waterproof materials should be covered on site.

6. Glass wool assembled on site and used as insulation roof should be stacked in a shelter.

7. The boards should be stacked in the order of construction, and the same type of board should be stacked together to avoid overlapping and overturning of different types of boards.

8. The stacking of color steel sandwich panels should be carried out in a place that is sheltered from rain or has rainproof measures.

9. The boards should be transported to the stacking point according to the schedule to avoid irreparable damage to the boards caused by prolonged stacking time on the construction site.